CASAINC WF-CYTVS08-EXP - Manuel d'utilisation - Page 2

8

Operation

127(:KHQWKHKHDWIXQFWLRQLVXVHGIRUWKHÀUVWWLPHDVOLJKWRGRUPD\

be present. This is normal and should not occur again unless the heater is
not used for an extended period of time.

USING THE CONTROL PANEL

1. Check that the heater outlet grill is not covered or obstructed in

anyway, and make sure the power to the unit is switched on.

2.

7KHÀUHSODFHFDQEHDFFHVVHGLQWZRZD\V8VLQJWKHWRXFKSDG

control panel, or using the multifunction remote control unit.

3.

3UHVVWKHDSSURSULDWHEXWWRQWRRSHUDWH\RXUÀUHSODFH

1. Main Power Button: This button supplies power to

DOORIWKHÀUHSODFHIXQFWLRQV,WPXVWEHWXUQHGRQ

IRUWKHÀUHSODFHWRZRUN

2. Heater Control Button: This button controls the

heater ON/OFF. When the temperature unit is

VHWDV¶)µRU´&µWKHWHPSHUDWXUHVFRSHDUHDV

follows:

´)µ )DKUHQKHLWWHPSHUDWXUHƒ)ƒ)ƒ)ƒ)

ƒ)ƒ)ƒ)ƒ)ƒ)ƒ)ƒ)ƒ)ƒ)

´&µ &HOVLXVWHPSHUDWXUHƒ&ƒ&ƒ&ƒ&

ƒ&ƒ&ƒ&ƒ&ƒ&&ƒ&ƒ&

ƒ&ƒ&

3. Flame Control Button: This button controls the

EULJKWQHVVRIWKHÁDPHHIIHFWZLWKVHWWLQJVDW

+LJK0HGLXPDQG/RZ:KHQWKHORJVHWLVÀUVW

WXUQHGRQWKHÁDPHZLOOFRPHRQDWWKHKLJKHVW

VHWWLQJ7KHORJVHWZLOOUHPHPEHUWKHODVWÁDPH

VHWWLQJXVHGDQGLQODWHUXVHWKHÁDPHEULJKWQHVV

will start at that setting, unless power to the unit

KDVEHHQLQWHUUXSWHG(DFKWLPHWKHÁDPHEXWWRQ

LVSUHVVHGWKHÁDPHEULJKWQHVVGHFUHDVHV7KH

RQO\ZD\WRWXUQRIIWKHÁDPHHIIHFWFRPSOHWHO\LV

to turn off the main power button (1).

4. Timer Button: This button controls the ON/OFF

and 8-time setting from 1 H to 8 H. When the

7LPHULVÀUVWWXUQHGRQLWZLOOFRPHRQDWWKH

shortest time setting (1 H). Each time the Timer

button is pressed, the time increases 1 hour,

up to the longest setting (8 hours). Once the

VHWWLPHH[SLUHVDOOÀUHSODFHIXQFWLRQVZLOOEH

automatically turned off.

5. Fahrenheit/Celsius Display: This button displays F

(Fahrenheit) or C (Celsius) depending on how the

WHPSHUDWXUHPRGHLVVHW:KHQWKHÀUHSODFHLV

turned on, the Fahrenheit (F) temperature will be

displayed. To switch from Fahrenheit to Celsius, or

vise-versa, when the HEATER is ON, hold HEATER

&21752/EXWWRQIRUVHFRQGV7KHÀUHSODFH

will remember the last temperature mode

setting, and in later use, the display will start at

that setting, unless power to the unit has been

interrupted.

6. Temperature/Timer Display: This LED display

shows the set point for the temperature and

timer functions. When either of these functions

LVDFWLYDWHGWKHGLVSOD\UHÁHFWVWKHVHWSRLQW

IRUÀYHVHFRQGVDQGWKHQIDGHVWREODFN$Q\

change in the set point of the temperature or

timer will reactivate the display, which again

IDGHVDIWHUÀYHVHFRQGV

1

4

3

2

IMPORTANT: Under normal operation, when power is interrupted from either an outage of from

unplugging unit from wall while still in operation, error code “EC” may appear on the LCD control

panel and the unit will cease operation. In order to reset, unplug the unit for 10 minutes, then plug

back in for normal operation in accordance with the Use and Care guide.

127($IWHUWKHÀUHSODFHKDVEHHQRSHUDWLQJZKHQWKHXQLWLVWXUQHGRIIWKHIDQQRWWKHKHDWHUZLOOFRQWLQXH

to run for about 1 minute to cool down the interior of the unit. During this time, you may feel cool air from the

EORZHURXWOHW7KLVLVQRUPDODQGGRHVQRWUHTXLUHDQ\DFWLRQ7KHIDQZLOOVWRSRQFHWKHLQWHULRUFRROVGRZQ

6

5

4

2

3

1