GE GFE28GELDS - Manuel d'utilisation - Page 10

GE GFE28GELDS
Page 1 Manuel original complet
1 Page 1 2 Page 2 3 Page 3 4 Page 4 5 Page 5 6 Page 6 7 Page 7 8 Page 8 9 Page 9 10 Page 10 11 Page 11 12 Page 12 13 Page 13 14 Page 14 15 Page 15 16 Page 16 17 Page 17 18 Page 18 19 Page 19 20 Page 20 21 Page 21 22 Page 22 23 Page 23 24 Page 24 25 Page 25 26 Page 26 27 Page 27 28 Page 28 29 Page 29 30 Page 30 31 Page 31 32 Page 32 33 Page 33 34 Page 34 35 Page 35 36 Page 36 37 Page 37 38 Page 38 39 Page 39 40 Page 40 41 Page 41 42 Page 42 43 Page 43 44 Page 44 45 Page 45 46 Page 46 47 Page 47 48 Page 48 49 Page 49 50 Page 50 51 Page 51 52 Page 52 53 Page 53 54 Page 54 55 Page 55 56 Page 56 57 Page 57 58 Page 58 59 Page 59 60 Page 60 61 Page 61 62 Page 62 63 Page 63 64 Page 64 65 Page 65 66 Page 66 67 Page 67 68 Page 68 69 Page 69 70 Page 70 71 Page 71 72 Page 72 73 Page 73 74 Page 74 75 Page 75 76 Page 76 77 Page 77 78 Page 78 79 Page 79 80 Page 80 81 Page 81 82 Page 82 83 Page 83 84 Page 84 85 Page 85 86 Page 86 87 Page 87
Page: / 87
Page précédentePage suivante
Téléchargement du manuel

49-60764

REINSTALLING THE
REFRIGERATOR DOORS

Reverse steps 1 through 4 to reinstall refrigerator
doors, follow details below for critical alignments.

A

Reinstall center hinge first

and torque the screws to
65 in-lbs.

:LWKWKH/+GRRU

DW

º to the front of the

case, lower the refrigerator
door onto the center hinge.
Ensure that the door and hinge align correctly.

B

Rotate doors closed and make sure moveable

center sealing portion of the door aligns with the

VWULNHU,IWKHGRRUZLOOQRWVHOIFORVHDIWHU

reinstalling, remove door, turn door upside down,

FKHFNDOLJQPHQWPDUNDQGDUURZWKHUHLVDQ
DOLJQPHQWPDUNRQWKHGRRUFORVXUHPHFKDQLVP,W

corresponds to an alignment arrow on the plastic
ring. Rotate door closure mechanism to align mark

DQGDUURZUHLQVWDOOGRRU'RRULQ'RRUPRGHOVGR

not have the same closure mechanism on the
right hand door. You may notice a difference in
closure.

Securely tape the door shut with masking tape or
have a second person support the door. Reinstall
the top hinge and torque the screws to 65 in-lbs.

C

Be sure to reinstall the ground wire and strain

relief to the top hinge.

'

Reinstall hinge cover.

NOTE:

Ensure wires are not

pinched or under screw bosses before tightening
screws.

3

REMOVE THE REFRIGERATOR
DOORS (cont)

Note: For proper installation later, please follow
the next step carefully.

)

Remove the tape and keeping the door as

VWUDLJKWDVSRVVLEOHRSHQWKHGRRUWR

º then lift

straight up to remove it.

REMOVE OPPOSITE DOOR

)ROORZWKHVDPHSURFHGXUHRQWKHRSSRVLWHGRRU

There are no water lines on the opposite side.

For Door in Door Models:

Securely tape the

inner and outer doors before installing or removing.

º door alignment not required during installation

or removal for these models.

4

REMOVE CENTER HINGE (if necessary)

5HPRYHWKHƎVFUHZVVHFXULQJWKHFHQWHUKLQJH

to the cabinet.

8VH7GULYHUWRUHPRYHRXWERDUGVFUHZ

5

Remove
center screw

/LIWXS RII

center hinge

2SHQ'RRUWRƒ

Align flats with tab.

8QGHUVLGHRI
)UHVK)RRG'RRU

If door cannot be installed at 90° follow steps below:

,QVWDOOGRRUDWƒWRFDVHIURQW
,IVSDFHOLPLWVRSHQLQJGRRUWROHVVWKDQƒWKHQ
D5HPRYHGRRUFDUHIXOO\WXUQGRRUXSVLGHGRZQ
E&KHFNDOLJQPHQWRIGRRUFORVXUHPHFKDQLVPVKDIW

on underside of door. The flats on the shaft should
correspond to alignment tab on plastic ring or
mark on bottom end cap.

F,IVKDIWLVQRWDOLJQHGWRWDEPDUNXVLQJ´

Allen wrench, rotate door closure mechanism
shaft counterclockwise for right door and clock-

ZLVHIRUOHIWGRRU7KHQDOLJQIODWZLWKWDEPDUN
G,QVWDOOWKHGRRUDWƒ

/RRVHQRXWHU

screws

Installation Instructions

INSTALLING THE REFRIGERATOR (Cont.)

INST

ALLA

TION INSTRUCTIONS

Page précédentePage suivante

„Téléchargement du manuel“ signifie que vous devez attendre que le fichier soit complètement chargé avant de pouvoir le lire en ligne. Certains manuels sont très volumineux, et le temps de chargement dépend de la vitesse de votre connexion Internet.

Autres modèles de réfrigérateurs GE

Tous les réfrigérateurs GE