RocketFish RF-PHD25 - Notice

QUICK SETUP GUIDE • GUIDE D’INSTALLATION RAPIDE •

GUÍA DE INSTALACIÓN RÁPIDA

PATA 2.5 Hard Drive Enclosure

Boîtier pour disque dur

PATA de 2,5 po (6,35 cm)

Caja para disco duro PATA de 2.5"

RF-PHD25

Package contents

• RF-PHD25 enclosure

• Carrying case

• High-speed USB 2.0 Y-cable

• Screws (4)

• CD that contains

Roxio BackOnTrack

• Screwdriver

backup software and

User Guide

• Quick Setup Guide

System requirements

One USB port
Windows® 7, Windows Vista®, Windows® XP, or Mac OS 10.2.0 or higher.

Installing your hard drive in the enclosure

1

Remove the two screws from the back panel, then pull the tray out from

the

enclosure.

2

Place a formatted hard drive into the tray, connect the data connector

to the corresponding connector on the enclosure board, then turn the
tray over and secure the drive to the metal plate with the two screws
(provided).

3

Slide the assembled tray back into the enclosure, then secure it with

the two screws you previously removed.

Connecting the enclosure to a computer

1

Plug a USB 2.0 cable into the enclosure, then plug the cable into a

USB port on the computer. The operating system automatically
recognizes the new drive.

Note

: The enclosure comes with a USB 2.0 Y cable, which has two standard

USB A male-type connectors.

One connector is for data and bus power. The other connector is for additional
power, if required. When you connect the USB 2.0 Y cable to the computer, use
both A male-type connectors to make sure the enclosure has sufficient power.
The operating system automatically detects and sets up the new drive.

2

If the drive is not formatted, please take the steps below to format

the

drive.

For Macintosh users:

1

Double-click on

Macintosh HD

.

2

Click the

Applications

folder.

3

Click the

Utilities

folder.

4

Double-click

Disk Utility

.

5

On the left side of the window, there are the drives connecting

to the computer. Select the drive you want to format and then
click the Erase tab.

6

Verify

Volume Format

is set to MS-DOS file system, then click

Erase

.

For Windows users:

1

Right-click

My Computer

and select

Manage

.

2

Click

Disk Management

on the left pane.

3

Right-click on the drive/device you want to format then select

Format

.

4

Occasionally, a warning may come out concerning active

partition,

click

Yes

.

5

Click

OK

to format.

Installing the backup software

Notes

:

• The

Roxio BackOnTrack

software only runs on Windows Vista,

Windows XP, or Windows 7. computers using USB.

• Connect the hard drive enclosure to your computer before installing
the

software.

• Before installing the backup software, make sure that your Windows
operating system has been updated to the latest service pack.

1

Save all files and close all programs.

2

Insert the included CD into the computer. The introductory screen

appears automatically. If the screen does not appear, double-click
the

autorun.exe

file on the CD.

3

Click

Install Roxio® BackOnTrack™ 3 LE

. The

Welcome

screen opens.

4

Click

Next

to begin the installation.

5

Follow the instructions in the setup wizard, then click

Next

to

continue.

6

Click

Finish

to finalize installation.

7

See the

User Guide

located on the CD for information on using the

software.

Disconnecting the enclosure from your computer

For Windows users:

1

Right-click the

Hotplug

icon (located near the clock on the taskbar).

2

Select the device you want to unplug, then click

STOP

.

3

When Windows notifies you that it is safe to do so, unplug the

enclosure from your computer.

For Macintosh users:

1

Drag the USB icon into the

TRASH

.

2

Unplug the enclosure.

One-year limited warranty

Visit www.rocketfishproducts.com for details

© 2009 Best Buy Enterprise Services, Inc. Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645

Contenu du carton

• Boîtier RF-PHD25

• Étui de transport

• Câble en Y USB 2.0 à haut débit

• Vis (4)

• CD avec l’application de sauvegarde

Roxio

• Tournevis

BackOnTrack

et le

Guide de l’utilisateur

• Guide d’installation rapide

Configuration système requise

Un port USB
Windows

MD

7, Windows Vista

MD

, Windows

MD

XP ou Mac OS 10.2.0 ou supérieur.

Installation du disque dur dans le boîtier

1

Retirer les deux vis du panneau arrière, puis extraire le plateau du boîtier.

2

Placer un disque dur formaté sur le plateau, connecter le connecteur de

données au connecteur correspondant de la carte du boîtier, puis
retourner le boîtier et fixer le disque dur à la plaque métallique à l’aide
des deux vis (fournies).

3

Replacer le plateau assemblé dans le boîtier, puis le fixer avec les deux

vis retirées précédemment.

Connexion du boîtier à l’ordinateur

1

Brancher un câble USB 2.0 sur le boîtier, puis brancher le câble sur un

port USB de l’ordinateur. Le système d’exploitation reconnaît
automatiquement le nouveau disque.

Remarque

: le boîtier est fourni avec un câble USB en Y, qui a deux connecteurs

standard USB A de type mâle.