Skil 6389AG - Manuel d'utilisation - Page 9
10
APPLICATION ADVICE
• Use the appropriate bits
#
! only use sharp bits
• For drilling in concrete or stone a steady pressure on the
drill is required
• When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
• Splinterfree drilling in wood
$
• Dustfree drilling in walls
%
• Dustfree drilling in ceilings
^
• Drilling in tiles without skidding
&
• For more tips see www.skil.com
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool and cord clean (especially the
ventilation slots)
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool
undismantled
together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
ENVIRONMENT
•
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol
*
will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
• We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents: EN 60745, EN 61000,
EN 55014, in accordance with the provisions of the
directives 2004/108/EC, 2006/42/EC, 2011/65/EU
•
Technical file at
: SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
¹ÊÁÂÆιƼ½ÊÇǾ¼½Æ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ ʽ¼¹Ɠ
Ĺ¾ ÁÂÿʹ¹¾
ÈÈÊÇιĹƹ¿½Ê
14.01.2013
NOISE/VIBRATION
• Measured in accordance with EN 60745 the sound
pressure level of this tool is 94 dB(A) and the sound
power level 105 dB(A) (standard deviation: 3 dB), and the
vibration
✱
(hand-arm method; uncertainty K = 1.5 m/s²)
✱
when drilling in metal 5.6 m/s²
✱
when hammer drilling in concrete 13.7 m/s²
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745; it
may be used to compare one tool with another and as a
preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for diferent applications, or with diferent
or poorly maintained accessories, may signiicantly
increase
the exposure level
- the times when the tool is switched of or when it is
running but not actually doing the job, may signiicantly
reduce
the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Perceuse à percussion
6389
INTRODUCTION
• Cet outil est conçu pour les travaux de perçage de
percussion dans la brique, le béton et dans la pierre
naturelle ainsi que le perçage dans le bois, le métal, la
céramique et les matières plastiques
• Cet outil n’est conçu pour un usage professionnel
• Lisez et conservez ce manuel d’instruction
2
SPECIFICATIONS TECHNIQUES
1
ELEMENTS DE L’OUTIL
3
A
Interrupteur de marche/arrêt et réglage de vitesse
B
Bouton de blocage de l’interrupteur
C
Molette de réglage de la vitesse maximum
D
Commutateur pour inverser le sens de rotation
E
Commutateur pour sélectionner la fonction de perçage
F
Poignée auxiliaire
G
Jauge de profondeur
SECURITE
INSTRUCTIONS GENERALES DE SECURITE
ATTENTION! Lisez tous les avertissements de
sécurité et toutes les instructions.
Ne pas suivre les
avertissements et instructions peut entraîner un choc
électrique, un incendie et/ou de graves blessures sur les
personnes.
Conservez tous les avertissements et toutes
les instructions pour pouvoir s’y reporter
ultérieurement.
La notion d’”outil électroportatif” dans les
avertissements se rapporte à des outils électriques
raccordés au secteur (avec câble de raccordement) et à des
outils électriques à batterie (sans câble de raccordement).
„Téléchargement du manuel“ signifie que vous devez attendre que le fichier soit complètement chargé avant de pouvoir le lire en ligne. Certains manuels sont très volumineux, et le temps de chargement dépend de la vitesse de votre connexion Internet.
Autres modèles de conducteurs à percussion Skil
-
Skil 1016AA
-
Skil 1016LA F0151016LA
-
Skil 1608LA F0151608LA
-
Skil 1611NA F0151611NA
-
Skil 1612NA F0151612NA
-
Skil 1613LA F0151613LA
-
Skil 1630NA F0151630NA
-
Skil 1640NA F0151640NA
-
Skil 6002 CA
-
Skil 6002LA F0156002LA