Skil Bosch 4285 LA - Manuel d'utilisation - Page 7

9

• When cutting metals, lubricate saw blade regularly with

oil

• For an accurate straight cut, guide tool with footplate

along the edge of a straight piece of wood

#

• Pre-drill a hole before making cut-outs

$

• Splinter-free cutting

- cover cutting-line with several layers of wide tape

before cutting

- always face the good side of the workpiece down

• For more tips see www.skil.com

mAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots C

2

)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool

undismantled

together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONmENT

•

Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol

%

will remind you of this when the need for

disposing occurs

DEClARATION OF CONFORmITY

Jig saw 4285

Technical data

1

• We declare under our sole responsibility that the product

described under “Technical data” is in conformity with the

following standards or standardization documents: EN

60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2014/30/EU, 2006/42/EC,

2011/65/EU

•

Technical file at

: SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

¹ÊÁÂÆιƼ½ÊÇǾ¼½Æ

ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿

ÍÊÇȽƓˁ˅ʿ˂ ʽ¼¹Ɠ

Ĺ¾ ÁÂÿʹ¹¾

ÈÈÊÇιĹƹ¿½Ê

02.02.2015

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 84 dB(A) and the sound

power level 95 dB(A) (standard deviation: 3 dB), and the

vibration

✱

(triax vector sum; uncertainty K = 1.5 m/s²)

✱

when cutting wood 11.9 m/s²

✱

when cutting metal 12.4 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with different

or poorly maintained accessories, may significantly

increase

the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may significantly

reduce

the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Scie sauteuse

4285

INTRODUCTION

• Cet outil est conçu pour effectuer des découpes et

coupes dans le bois, les matières plastiques, le métal, et

est approprié pour des coupes droites et curvilignes avec

des angles d’onglet jusqu’à 45°

• Cet outil n’est conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction

3

CARACTERISTIQUES TECHNIQUES

1

ElEmENTS DE l’OUTIl

2

A

Interrupteur pour mise en marche/arrêt

B

Bouton de blocage de l’interrupteur

C

Fentes de ventilation

D

Rangement pour la clé hexagonale

SECURITE

INSTRUCTIONS GENERAlES DE SECURITE

ATTENTION! lisez tous les avertissements de

sécurité et toutes les instructions.

Ne pas suivre les

avertissements et instructions peut entraîner un choc

électrique, un incendie et/ou de graves blessures sur les

personnes.

Conservez tous les avertissements et

toutes les instructions pour pouvoir s’y reporter

ultérieurement.

La notion d’”outil électroportatif” dans les

avertissements se rapporte à des outils électriques

raccordés au secteur (avec câble de raccordement) et à

des outils électriques à batterie (sans câble de

raccordement).