Manufacturer’s warranty; Mode d'emploi original; Indications relatives à la documentation - Hilti 2251589 - Manuel d'utilisation - Page 6

12

Français

2289591

*2289591*

9

Troubleshooting

If a problem occurs, always observe the charge-status and fault indicator of the battery. See the section

headed

Status indicators of the Li­ion battery

.

If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by

yourself, please contact

Hilti

Service.

Trouble or fault

Possible cause

Action to be taken

Product does not develop full

power.

The control switch is not fully

pressed.

▶

Press the control switch fully.

The product can’t be

switched on.

Switch-on interlock not activated.

▶

Activate the switch-on interlock.

Product does not start.

Bandsaw blade blocked

▶

Check whether the saw blade is

fitted correctly and/or damaged.

LEDs of the battery show

nothing

Battery defective

▶

Contact

Hilti

Service.

10

Disposal

WARNING

Risk of injury due to incorrect disposal!

Health hazards due to escaping gases or liquids.

▶

DO NOT send batteries through the mail!

▶

Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.

▶

Dispose of your battery out of the reach of children.

▶

Dispose of the battery at your

Hilti Store

, or consult your local governmental garbage disposal or public

health and safety resources for disposal instructions.

Most of the materials from which

Hilti

products are manufactured can be recycled. The materials must be

correctly separated before they can be recycled. In many countries, your old tools, machines or appliances

can be returned to

Hilti

for recycling. Ask

Hilti

Service or your Hilti sales representative for further information.

▶

Do not dispose of power tools, electronic equipment or batteries as household waste!

11

Manufacturer’s warranty

▶

Please contact your local

Hilti

representative if you have questions about the warranty conditions.

12

Further information

For more information on operation, technology, environment and recycling, follow this link:

qr.hilti.com/manual/?id=2289591

This link is also to be found at the end of the documentation, in the form of a QR code.

Mode d'emploi original

1

Indications relatives à la documentation

1.1

À propos de cette documentation

• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement

requise pour assurer la sécurité du travail et un maniement sans perturbations.

• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que

celles figurant sur le produit.

• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers

avec ce mode d'emploi.