• Technical file at; protect yourself against the effects of vibration - Skil 6110 - Manuel d'utilisation - Page 7

9

• Technical file at

: SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

16.05.2013

SKIL Europe BV, 4825 BD Breda, NL

Marijn van der Hoofden

Operations & Engineering

Olaf Dijkgraaf

Approvals Manager

13

19.03.2015

NOISE/VIBRATION

•

Measured in accordance with EN 60745 the sound

pressure level of this tool is 95 dB(A) and the sound

power level 106 dB(A) (standard deviation: 3 dB),

and the vibration

.

(triax vector sum; uncertainty

K = 1.5 m/s²)

.

when drilling in metal 6.8 m/s²

.

when impact drilling in concrete 15.4 m/s²

•

The vibration emission level has been measured in

accordance with a standardised test given in EN 60745;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-

using the tool for different applications, or with different

or poorly maintained accessories, may significantly

increase

the exposure level

-

the times when the tool is switched off or when it is

running but not actually doing the job, may significantly

reduce

the exposure level

!

protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Perceuse à percussion

6110

INTRODUCTION

•

Cet outil est conçu pour les travaux de perçage de

percussion dans la brique ainsi que le perçage dans le

bois, le métal, la céramique et les matières plastiques

•

Cet outil n'est conçu pour un usage professionnel

•

Lisez et conservez ce manuel d’instruction

3

CARACTERISTIQUES TECHNIQUES

1

ELEMENTS DE L'OUTIL

2

A

Interrupteur de marche/arrêt et réglage de vitesse

B

Bouton de blocage de l’interrupteur

C

Molette de réglage de la vitesse maximum

D

Commutateur pour inverser le sens de rotation

E

Commutateur pour sélectionner la fonction de perçage

F

Indicateur de la fonction de perçage sélectionnée

G

Poignée auxiliaire

H

Jauge de profondeur

J

Fentes de ventilation

•

Adjusting drilling depth

r

•

Holding and guiding the tool

t

!

while working, always hold the tool at the grey-

coloured grip area(s)

-

always use auxiliary handle G

2

(can be adjusted

as illustrated)

-

keep ventilation slots J

2

uncovered

-

do not apply too much pressure on the tool; let the tool

do the work for you

APPLICATION ADVICE

•

Use the appropriate bits

y

!

only use sharp bits

•

For drilling in stone a steady pressure on the drill is

required

•

When drilling ferrous metals

-

pre-drill a smaller hole, when a large hole is required

-

lubricate drill bit occasionally with oil

•

Splinterfree drilling in wood

u

•

Dustfree drilling in walls

i

•

Dustfree drilling in ceilings

o

•

Drilling in tiles without skidding

p

•

For more tips see www.skil.com

MAINTENANCE / SERVICE

•

This tool is not intended for professional use

•

Always keep tool and cord clean (especially ventilation

slots J

2

)

!

disconnect the plug before cleaning

•

If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-

send the tool

undismantled

together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

•

Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-

in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-

symbol

5

will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

Impact drill 6110

Technical data

1

•

We declare under our sole responsibility that the product

described under "Technical data" is in conformity with

the following standards or standardization documents:

EN 60745, EN 61000, EN 55014, in accordance with

the provisions of the directives 2004/108/EC (until

19.04.2016), 2014/30/EU (from 20.04.2016), 2006/42/

EC, 2011/65/EU