Auxiliary Handle; Operation; Starting Operation; Switching On and Off - Bosch GEX 125 AC - Manuel d'utilisation - Page 8

Rectifieuse Bosch GEX 125 AC - Manuel d'utilisation, à lire gratuitement en ligne au format PDF. Nous espérons que cela vous aidera à résoudre toutes les questions que vous pourriez avoir. Si vous avez encore des questions, contactez-nous via le formulaire de contact.
Table des matières:
- Page 6 – Noise/Vibration Information; Wear hearing protection!; Declaration of Conformity; Assembly; Replacing the Sanding Sheet
- Page 7 – Selecting the Sanding Sheet
- Page 8 – Auxiliary Handle; Operation; Starting Operation; Switching On and Off
- Page 9 – Sanding Plate Brake; Working Advice; Sanding Surfaces
- Page 10 – Maintenance and Service; Maintenance and Cleaning; not; After-sales Service and Customer; Great Britain
- Page 11 – Disposal; Only for EC countries:
20
| English
1 609 929 N98 | (13.11.08)
Bosch Power Tools
Dust/Chip Extraction
f
Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
–
Use dust extraction whenever possible.
–
Provide for good ventilation of the work-
ing place.
–
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Integrated Dust Extraction with Dust Box
(see figures C1 – C4)
Before assembling the dust box
6
, pull out the
plastic slider
12
. Place the dust box
6
onto the
extraction outlet
13
and allow it to engage.
Make sure that the plastic slider
12
engages in
the holder
11
.
To empty the dust box
6
, press the latching
levers
14
on the side of the dust box (
n
). Pull
off the dust box toward the bottom (
o
).
Before opening the dust box
6
, it is recommend-
ed to loosen the dust from the filter element by
gently striking it against a firm support (as
shown in the figure).
Grasp the dust box
6
by the recessed grip, fold
the filter element
15
upward and empty the dust
box. Clean the thin plates of the filter element
15
with a soft brush.
External Dust Extraction (see figure D)
Slide the extraction adapter
16
onto the outlet
piece
13
. Ensure that the latching levers of the
extraction adapter engage. The extraction
adapter
16
accepts a vacuum hose with a diam-
eter of 19 mm.
For removal of the extraction adapter
16
, press
the latching levers together at the rear and pull
the extraction adapter off.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
Internal Dust Extraction with Dust Bag
(see figure E)
For small sanding jobs, a dust bag (accessory)
18
can be connected.
Before mounting the dust bag
18
, pull out the
plastic slider
12
. Slide the dust-bag sleeve firmly
over the extraction outlet
13
. Pay attention that
the plastic slider
12
engages in the holder in-
tended for it on the dust bag
18
.
To maintain optimum dust collection, empty the
dust bag
18
in good time.
Auxiliary Handle
The auxiliary handle
1
enables convenient han-
dling and optimal distribution of power, espe-
cially at high removal rates.
Fasten the auxiliary handle
1
with screw
2
to the
casing.
Operation
Starting Operation
f
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Switching On and Off
To
start
the machine, press the On/Off switch
4
and keep it pressed.
To lock the
pressed
On/Off switch
4
, press the
lock-on button
5
.
To
switch off
the machine, release the On/Off
switch
4
or when it is locked with the lock-on
button
5
, briefly press the On/Off switch
4
and
then release it.
OBJ_BUCH-424-002.book Page 20 Thursday, November 13, 2008 9:49 AM
„Téléchargement du manuel“ signifie que vous devez attendre que le fichier soit complètement chargé avant de pouvoir le lire en ligne. Certains manuels sont très volumineux, et le temps de chargement dépend de la vitesse de votre connexion Internet.
Résumé
18 | English 1 609 929 N98 | (13.11.08) Bosch Power Tools Noise/Vibration Information Measured values determined according to EN 60745.Typically the A-weighted sound pressure level of the product is 75 dB(A). Uncertainty K = 3 dB.The noise level when working can exceed 80 dB(A). Wear hearing protect...
English | 19 Bosch Power Tools 1 609 929 N98 | (13.11.08) Selecting the Sanding Sheet Depending on the material to be worked and the required rate of material removal, different sanding sheets are available: Selection of the Sanding Plate Depending on the application, the machine can be equipped wit...
20 | English 1 609 929 N98 | (13.11.08) Bosch Power Tools Dust/Chip Extraction f Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touch-ing or breathing-in the dusts can cause aller-gic reactions and/or lead to respiratory inf...
Autres modèles de rectifieuses Bosch
-
Bosch 18V-10 solo (0.601.9J4.002)
-
Bosch 18V-10, (06019J4004)
-
Bosch GBR 15 CA
-
Bosch GCT 115 Professional
-
Bosch GEX 125 1 AE
-
Bosch GEX 125 1 AE 0601387500
-
Bosch GEX 125 150 AVE
-
Bosch GEX 125 150 AVE Professional
-
Bosch GEX 125-1 AE (0601387501)
-
Bosch GEX 125-150 AVE (060137B101)