Meuleuse d’angle - Skil 9176 - Manuel d'utilisation - Page 5

9

- the working speed of the cutting disc depends on the

material to be cut

- do not brake cutting discs with side pressure

• Holding and guiding the tool

- always hold the tool firmly with both hands, so you will

have full control of the tool at all times

! while working, always hold the tool at the

grey-coloured grip area(s)

!

- provide for a secure stance

- pay attention to the direction of rotation; always hold

the tool so, that sparks and grinding/cutting dust fly

away from the body

- keep ventilation slots J

2

uncovered

APPLICATION ADVICE

• Instead of flange B

2

the "CLIC" quick-clamping flange

(SKIL accessory 2610388766) can be used; grinding/

cutting discs can then be mounted without the use of

accessory keys

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots J

2

)

! do not attempt to clean ventilation slots by

inserting pointed objects through openings

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool

undismantled

together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

•

Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol

@

will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORmITY

• We declare under our sole responsibility that the product

described under “Technical data” is in conformity with the

following standards or standardization documents: EN

60745, EN 61000, EN 55014, in accordance with the

provisions of the directives 2004/108/EC, 2006/42/EC,

2011/65/EU

•

Technical file at

: SKIL Europe BV (PT-SEU/ENG1),

4825 BD Breda, NL

¹ÊÁÂÆιƼ½ÊÇǾ¼½Æ

ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿

ÍÊÇȽƓˁ˅ʿ˂ ʽ¼¹Ɠ

Ĺ¾ ÁÂÿʹ¹¾

ÈÈÊÇιĹƹ¿½Ê

27.01.2014

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 90 dB(A) and the sound

power level 101 dB(A) (standard deviation: 3 dB), and the

vibration

✱

(hand-arm method; uncertainty K = 1.5 m/s²)

✱

when surface grinding 8.1 m/s²

✱

when sanding 6.2 m/s²

! other applications (such as cutting-off or wire

brushing) may have different vibration values

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with different

or poorly maintained accessories, may significantly

increase

the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may significantly

reduce

the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Meuleuse d’angle

9176

INTRODUCTION

• Cet outil sert au meulage, au tronçonnage et à l’ébarbage

de pièces en métal et en pierre sans utiliser de l’eau;

combiné avec des accessoires spécifiques, cet outil peut

également servir au brossage et au ponçage

• Cet outil n’est conçu pour un usage professionnel

• Les opérations de coupe avec disques à tronçonner

abrasifs ne sont autorisées que si une protection de

tronçonnage (disponible en option comme

accessoire SKIL 2610399439) est utilisée

• Lisez et conservez ce manuel d’instruction

3

CARACTERISTIQUES TECHNIQUES

1

ELEMENTS DE L’OUTIL

2

A

Arbre

B

Bride de serrage

C

Clé

D

Bouton de blocage de l’arbre